Laser Show Systems - Pinouts - 6800HPl

Home Page >>> Backstage Area >> Laser Show Systems > Pinouts

Introduction

System Design

Scanning Systems

Support Equipment

Laser Graphics

Show Production

Pinouts

Our Sponsors

Laser Show Systems - Pinouts

This section contains pinouts of many popular boards and components that are used in laser show systems.
DISCLAIMER: The pinouts shown here were contributed by manufacturers, vendors and individuals. While every effort has been made to insure accuracy, LaserFX.com can not be responsible for any errors or omissions.

Cambridge Technology Inc. logo

Cambridge Technology Inc., 6800HP galvo

Pinout for on-galvo connector of the 6800Hp galvo. NOT an official Cambridge Technology document - for the latest info, contact mcasey@camtech.com

6800HP Galvo pinout diagram

Galvo connector

Pin Number	Signal description
1	Position detector output B
2	N/C
3	AGC output
4	N/C
5	Motor drive (+)
6	Motor drive (-)
7	N/C
8	Position detector shield
9	Position detector output A
10	Diode Common

DISCLAIMER: Some of the information in the Backstage area is provided by the persons or companies named on the relevant page(s). Laser F/X does NOT endorse or recommend any products/services and is NOT responsible for the technical accuracy of the information provided. We provide this information as a service to laserists using the Backstage area.

[ Introduction - System Design - Scanning Systems - Support Equipment - Laser Graphics - Show Production - Pinouts ]